FIXTURLASER DIALS KIT

/FIXTURLASER DIALS KIT
FIXTURLASER DIALS KIT 2017-02-22T11:14:20+00:00

The Fixturlaser Dials Kit

The Fixturlaser Dials Kit is designed to perform reverse rim shaft alignments.

The Fixturlaser Dials Kit is designed to perform reverse rim shaft alignments. Together withThe Fixturlaser Dials App it performs dial indicator shaft alignment calculations as it guides the user through the reverse rim alignment process with its stunning 3D graphical interface. Two dial indicators are included. The two V-brackets come assembled with chains that will allow mounting on shafts up to 175 mm in diameter, 450 mm with optional extension chains.

The kit, shipped in a durable fitted case, includes 3 pairs of dial indicator rods in 3 lengths to maximize the mounting options. The steel rods are hollow to minimize sag. Android, iOS phones or tablets are the perfect match for the Fixturlaser Dials Kit. When loaded with the free Fixturlaser Dials App, you’ll be able to perform alignments using the Verti-Zontal method and leave the math to the app.

Automatic Bar Sag Compensation

The Fixturlaser Dials app, when used in conjunction with the Fixturlaser Dials Kit, now offers automatic bar sag compensation. Here’s how it works. The bar sag of the Fixturlaser Dials kit is a known quantity, which means that it can be calculated for any given set up using the kit, based on the distance between the dial indicators. This means that the user can configure the app to automatically compensate for the amount of sag experienced.

FIXTURLASER PAT COMPLETE SYSTEM
Weight (incl. all standard parts):  1,5 kg (3,3 lbs)
Storage Temperature: -20 to 70°C (-4 to 158°F)
CASE
Material: High Impact ABS Plastic
Sealing: Dust, water (5m/16 feet), and air tight with air pressure compensation valve
Drop Test: 3 m (10 feet) on to concrete floor
Dimensions: 250 x 180 x 80 mm (9,84 x 7,09 x 3,15 inch)
MEASUREMENT UNITS
Housing Material: Extruded aluminum (molded PA cover)
Operating Temp: 0 to 40°C (32 to 104°F)
Relative Humidity: 340 g (12 oz)
Weight: 250 x 180 x 80 mm (9,84 x 7,09 x 3,15 inch)
Dimensions: 61 x 77 x 61 mm (2,4 x 3 x 2,4 in)
Environmental Protection:  IP 65
Laser: 630 – 675 nm class II diode laser
Laser Line Fan Angle:  90°
Laser Power: < 1 mW
Measurement Distance: 50 mm – 6000 mm (1,97 – 236,22 in)
Measurement Accuracy:  Better than 0,5 m (0,02 in) or 0,2 degrees
Pulley Diameter Range:  From 75 mm (2,95 in) and larger (standard)
Pulley Belt Groove Width:  6 mm – 40 mm (0,23 – 1,57 in) (standard)
Power Supply: 2 pcs of LR03 (AAA)1,5 V per unit
Operating time: 20 hours of continuous operation
Laser Safety: See yellow label below

Click Here To Download

Related Products